- the outermost loop iterates 900 times,
- within that you have lots of nested loops, which in total iterate 900 times,
- so your code will perform 900*900 iterations in total.
How to fix loop which over the determined index ?
1 view (last 30 days)
Show older comments
Hi guys, im trying to do looping ii 1:900 but why when u run it, it was never-ending loop. After reach 900, it will continue to 901 but using model with i = 1 (start again from beginning).
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1695106/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1695111/image.png)
Here are my code:
%% clean-up the workspace & command window
clc;
clear;
clc;
tic;
%% Preparation to connect with OAPI SAP2000
%set the following flag to true to attach to an existing instance of the program otherwise a new instance of the program will be started
AttachToInstance = true();
% set the following flag to true to manually specify the path to ETABS.exe
% this allows for a connection to a version of ETABS other than the latest installation
% otherwise the latest installed version of ETABS will be launched
SpecifyPath = true();
% if the above flag is set to true, specify the path to ETABS below
ProgramPath = 'C:\Program Files\Computers and Structures\SAP2000 25\SAP2000.exe';
% full path to API dll set it to the installation folder
APIDLLPath = 'C:\Program Files\Computers and Structures\SAP2000 25\SAP2000v1.dll';
% create API helper objectETABSv1ETAB
a = NET.addAssembly(APIDLLPath);
helper = SAP2000v1.Helper;
helper = NET.explicitCast(helper,'SAP2000v1.cHelper');
if AttachToInstance
% attach to a running instance of ETABS
SapObject = helper.GetObject('CSI.SAP2000.API.SapObject');
SapObject = NET.explicitCast(SapObject,'SAP2000v1.cOAPI');
else
if SpecifyPath
% create an instance of the ETABS object from the specified path
SapObject = helper.CreateObject(ProgramPath);
else
% create an instance of the ETABS object from the latest installed ETABS
SapObject = helper.CreateObjectProgID('CSI.SAP2000.API.SapObject');
end
SapObject = NET.explicitCast(SapObject,'SAP2000v1.cOAPI');
% start ETABS application
SapObject.ApplicationStart;
end
helper = 0;
% create SapModel object
SapModel = NET.explicitCast(SapObject.SapModel,'SAP2000v1.cSapModel');
%% Define Variant Model
VariantModel = compose('%d',2:2);
VariantENDT= compose('A%d',1:5);
VariantTOS1= compose('B%d',1:1);
VariantTOS2 = compose('C%d',1:1);
VariantTOS3 = compose('D%d',1:1);
VariantBOS1 = compose('E%d',1:1);
VariantBOS2 = compose('F%d',1:1);
VariantBOS3 = compose('G%d',1:1);
VariantDOS1 = compose('H%d',1:1);
VariantDOS2 = compose('I%d',1:1);
VariantVOS = compose('J%d',1:1);
VariantTSS = compose('K%d',1:6);
VariantBSS = compose('L%d',1:6);
VariantDSS = compose('M%d',1:1);
VariantVSS = compose('N%d',1:1);
VariantCOL = compose('O%d',1:5);
%% Define Variable For Looping Analysis
Specimen = repmat("",length(VariantModel)*length(VariantENDT)*length(VariantTOS1)*length(VariantBOS1)*length(VariantDOS1)*length(VariantVOS)*length(VariantTSS)*length(VariantBSS)*length(VariantDSS)*length(VariantCOL),1);
Optimizevalue = zeros(1,length(Specimen));
checkratio = strings(1,length(Specimen));
CheckHingeCOL = strings(1,length(Specimen));
checkfuse = strings(1,length(Specimen));
R = zeros(1,length(Specimen));
W = zeros(1,length(Specimen));
Cg = zeros(1,length(Specimen));
ii = 0;
for i = 1:length(Specimen)
for iVAR = 1:length(VariantModel)
for iEND = 1:length(VariantENDT)
ENDsection = string(VariantENDT(iEND));
for iTOS = 1:length(VariantTOS1)
TOS1section = string(VariantTOS1(iTOS));
TOS2section = string(VariantTOS2(iTOS));
TOS3section = string(VariantTOS3(iTOS));
for iBOS = 1 : length(VariantBOS1)
BOS1section = string(VariantBOS1(iBOS));
BOS2section = string(VariantBOS2(iBOS));
BOS3section = string(VariantBOS3(iBOS));
for iDOS = 1 : length(VariantDOS1)
DOS1section = string(VariantDOS1(iDOS));
DOS2section = string(VariantDOS2(iDOS));
for iVOS = 1 : length(VariantVOS)
VOSsection = string(VariantVOS(iVOS));
for iTSS = 1 : length(VariantTSS)
TSSsection = string(VariantTSS(iTSS));
for iBSS = 1 : length(VariantBSS)
BSSsection = string(VariantBSS(iBSS));
for iDSSVSS = 1 : length(VariantDSS)
DSSsection = string(VariantDSS(iDSSVSS));
VSSsection = string(VariantVSS(iDSSVSS));
for iCOL = 1 : length(VariantCOL)
COLsection = string(VariantCOL(iCOL));
ii = ii+1;
Specimen(ii) = append(VariantModel(iVAR),VariantENDT(iEND),VariantTOS1(iTOS),VariantTOS2(iTOS),VariantTOS3(iTOS),VariantBOS1(iBOS),VariantBOS2(iBOS),VariantBOS3(iBOS),VariantDOS1(iDOS),VariantDOS2(iDOS),VariantVOS(iVOS),VariantTSS(iTSS),VariantBSS(iBSS),VariantDSS(iDSSVSS),VariantVSS(iDSSVSS),VariantCOL(iCOL));
%% DEFINE OAPI FUNCTION
ret = SapModel.InitializeNewModel(SAP2000v1.eUnits.kN_m_C);
File = NET.explicitCast(SapModel.File,'SAP2000v1.cFile');
PropFrame = NET.explicitCast(SapModel.PropFrame,'SAP2000v1.cPropFrame');
Group=NET.explicitCast(SapModel.GroupDef,'SAP2000v1.cGroup');
FrameObj = NET.explicitCast(SapModel.FrameObj,'SAP2000v1.cFrameObj');
Analyze = NET.explicitCast(SapModel.Analyze,'SAP2000v1.cAnalyze');
DesignSteel = NET.explicitCast(SapModel.DesignSteel,'SAP2000v1.cDesignSteel');
View = NET.explicitCast(SapModel.View,'SAP2000v1.cView');
DatabaseTables = NET.explicitCast(SapModel.DatabaseTables,'SAP2000v1.cDatabaseTables');
SelectObj = NET.explicitCast(SapModel.SelectObj,'SAP2000v1.cSelect');
%% MODELING SAP2000
FileName = 'D:\\REF FAROS\\\MATLAB\\Prelim\\Prelimnarysection.s2k';
ret = File.OpenFile(FileName);
ret = SapModel.SetPresentUnits(SAP2000v1.eUnits.N_mm_C);
% define frame section property for A(EndTruss)
ret = PropFrame.SetTube('A1','BJ-37',152,152,6.4,6.4);
ret = PropFrame.SetTube('A2','BJ-37',177,177,7.9,7.9);
ret = PropFrame.SetTube('A3','BJ-37',203,203,12.7,12.7);
ret = PropFrame.SetTube('A4','BJ-37',254,254,9.5,9.5);
ret = PropFrame.SetTube('A5','BJ-37',304,304,12.7,12.7);
% define frame section property for B(TOS1)
ret = PropFrame.SetTube('B1','BJ-37',152,152,6.4,6.4);
ret = PropFrame.SetTube('B2','BJ-37',177,177,6.4,6.4);
ret = PropFrame.SetTube('B3','BJ-37',203,203,6.4,6.4);
% define frame section property for C(TOS2)
ret = PropFrame.SetTube('C1','BJ-37',152,152,7.9,7.9);
ret = PropFrame.SetTube('C2','BJ-37',177,177,7.9,7.9);
ret = PropFrame.SetTube('C3','BJ-37',203,203,7.9,7.9);
% define frame section property for D(TOS3)
ret = PropFrame.SetTube('D1','BJ-37',177,177,7.9,7.9);
ret = PropFrame.SetTube('D2','BJ-37',203,203,9.5,9.5);
ret = PropFrame.SetTube('D3','BJ-37',254,254,9.5,9.5);
% define frame section property for E(BOS1)
ret = PropFrame.SetTube('E1','BJ-37',152,152,6.4,6.4);
ret = PropFrame.SetTube('E2','BJ-37',177,177,6.4,6.4);
ret = PropFrame.SetTube('B3','BJ-37',203,203,6.4,6.4);
% define frame section property for F(BOS2)
ret = PropFrame.SetTube('F1','BJ-37',152,152,7.9,7.9);
ret = PropFrame.SetTube('F2','BJ-37',177,177,7.9,7.9);
ret = PropFrame.SetTube('F3','BJ-37',203,203,7.9,7.9);
% define frame section property for G(BOS3)
ret = PropFrame.SetTube('G1','BJ-37',177,177,7.9,7.9);
ret = PropFrame.SetTube('G2','BJ-37',203,203,9.5,9.5);
ret = PropFrame.SetTube('G3','BJ-37',254,254,9.5,9.5);
% define frame section property for H(DOS1)
ret = PropFrame.SetTube('H1','BJ-37',177,177,7.9,7.9);
ret = PropFrame.SetTube('H2','BJ-37',203,203,12.7,12.7);
ret = PropFrame.SetTube('H3','BJ-37',254,254,12.7,12.7);
% define frame section property for I(DOS2)
ret = PropFrame.SetTube('I1','BJ-37',152,152,6.4,6.4);
ret = PropFrame.SetTube('I2','BJ-37',177,177,7.9,7.9);
ret = PropFrame.SetTube('I3','BJ-37',203,203,12.7,12.7);
% define frame section property for J(VOS)
ret = PropFrame.SetTube('J1','BJ-37',50,50,2.2,2.2);
% define frame section property for K(TSS)
ret = PropFrame.SetTube('K1','BJ-37',177,177,7.9,7.9);
ret = PropFrame.SetTube('K2','BJ-37',203,203,9.5,9.5);
ret = PropFrame.SetTube('K3','BJ-37',254,254,9.5,9.5);
ret = PropFrame.SetTube('K4','BJ-37',254,203,9.5,9.5);
ret = PropFrame.SetTube('K5','BJ-37',304,254,12.7,12.7);
ret = PropFrame.SetTube('K6','BJ-37',304,304,12.7,12.7);
% define frame section property for L(BSS)
ret = PropFrame.SetTube('L1','BJ-37',177,177,7.9,7.9);
ret = PropFrame.SetTube('L2','BJ-37',203,203,9.5,9.5);
ret = PropFrame.SetTube('L3','BJ-37',254,254,9.5,9.5);
ret = PropFrame.SetTube('L4','BJ-37',254,203,9.5,9.5);
ret = PropFrame.SetTube('L5','BJ-37',304,254,12.7,12.7);
ret = PropFrame.SetTube('L6','BJ-37',304,304,12.7,12.7);
% define frame section property for M(DSS)
ret = PropFrame.SetTube('M1','BJ-37',40,40,2.2,2.2);
% define frame section property for N(VSS)
ret = PropFrame.SetTube('N1','BJ-37',30,30,2.2,2.2);
% define frame section property for O(COL)
ret = PropFrame.SetTube('O1','BJ-37',406,304,15.9,15.9);
ret = PropFrame.SetTube('O2','BJ-37',455,250,15.9,15.9);
ret = PropFrame.SetTube('O3','BJ-37',508,250,15.9,15.9);
ret = PropFrame.SetTube('O4','BJ-37',508,304,19,19);
ret = PropFrame.SetTube('O5','BJ-37',600,304,19,19);
% assign frame section by group
ret = FrameObj.SetSection('End Truss',ENDsection,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('TopOrdinarySegment1',TOS1section,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('TopOrdinarySegment2',TOS2section,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('TopOrdinarySegment3',TOS3section,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('BottomOrdinarySegment1',BOS1section,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('BottomOrdinarySegment2',BOS2section,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('BottomOrdinarySegment3',BOS3section,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('DiagonalOrdinarySegment1',DOS1section,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('DiagonalOrdinarySegment2',DOS2section,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('VerticalOrdinarySegment',VOSsection,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('TopSpecialSegment',TSSsection,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('BottomSpecialSegment',BSSsection,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('DiagonalSpecialSegment',DSSsection,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('VerticalSpecialSegment',VSSsection,SAP2000v1.eItemType.Group);
ret = FrameObj.SetSection('Column',COLsection,SAP2000v1.eItemType.Group);
%% running analyze
ret = File.Save('D:\\REF FAROS\\\MATLAB\\Prelim\\Preliminarysection-'+string(Specimen(ii)));
ret = SapModel.SetPresentUnits(SAP2000v1.eUnits.kN_m_C);
ret = Analyze.RunAnalysis();
%% check design steel section
% Add load combination
RespCombo = NET.explicitCast(SapModel.RespCombo,'SAP2000v1.cCombo');
ret = RespCombo.Add('1.2D+1.6L',0);
ret = RespCombo.SetCaseList('1.2D+1.6L',SAP2000v1.eCNameType.LoadCase,'DEAD',1.2);
ret = RespCombo.SetCaseList('1.2D+1.6L',SAP2000v1.eCNameType.LoadCase,'SUPERDEAD',1.2);
ret = RespCombo.SetCaseList('1.2D+1.6L',SAP2000v1.eCNameType.LoadCase,'LIVE',1.6);
% DesignSteel
ret = DesignSteel.SetCode('AISC 360-10');
ret = DesignSteel.SetComboStrength('1.2D+1.6L',true);
ret = DesignSteel.SetComboAutoGenerate(false);
ret = DesignSteel.StartDesign();
ret = View.RefreshView(0, false());
%% set load case and combo for display table
LoadCaseList = NET.createArray('System.String',6);
LoadCaseList(1)='DEAD';
LoadCaseList(2)='MODAL';
LoadCaseList(3)='SUPERDEAD';
LoadCaseList(4)='LIVE';
LoadCaseList(5)='Gravity NLS';
LoadCaseList(6)='Pushover-UX';
ret = DatabaseTables.SetLoadCasesSelectedForDisplay({'MODAL','DEAD','SUPERDEAD','LIVE','Gravity NLS','Pushover-UX'});
LoadCombList = NET.createArray('System.String',1);
LoadCombList(1)='1.2D+1.6L';
ret = DatabaseTables.SetLoadCombinationsSelectedForDisplay({'1.2D+1.6L'});
ret = DatabaseTables.SetTableOutputOptionsForDisplay(0,0,0,true,1,12,true,1,12,2,2,2,2,2,3,1,1,2);
%% get frame label
NumberFrame = 0;
AllFrameName = {''};
[~,NumberFrame,AllFrameName] = FrameObj.GetNameList(NumberFrame,AllFrameName);
% Column
NumberItems=0;
ObjectType=0;
ObjectName={''};
ret = SelectObj.Group("Column");
[~,NumberItems,ObjectType,ObjectName] = SelectObj.GetSelected(NumberItems,ObjectType,ObjectName);
ret = SelectObj.ClearSelection;
frameCOL = string(ObjectName);
% Endtruss
NumberItems=0;
ObjectType=0;
ObjectName={''};
ret = SelectObj.Group("End Truss");
[~,NumberItems,ObjectType,ObjectName] = SelectObj.GetSelected(NumberItems,ObjectType,ObjectName);
ret = SelectObj.ClearSelection;
frameEND = string(ObjectName);
% Top Ordinary Segment (TOS)
NumberItems=0;
ObjectType=0;
ObjectName={''};
ret = SelectObj.Group("TopOrdinarySegment1");
ret = SelectObj.Group("TopOrdinarySegment2");
ret = SelectObj.Group("TopOrdinarySegment3");
[~,NumberItems,ObjectType,ObjectName] = SelectObj.GetSelected(NumberItems,ObjectType,ObjectName);
ret = SelectObj.ClearSelection;
frameTOS = string(ObjectName);
% Bottom Ordinary Segment (BOS)
NumberItems=0;
ObjectType=0;
ObjectName={''};
ret = SelectObj.Group("BottomOrdinarySegment1");
ret = SelectObj.Group("BottomOrdinarySegment2");
ret = SelectObj.Group("BottomOrdinarySegment3");
[~,NumberItems,ObjectType,ObjectName] = SelectObj.GetSelected(NumberItems,ObjectType,ObjectName);
ret = SelectObj.ClearSelection;
frameBOS = string(ObjectName);
% Diagonal Ordinary Segment (DOS)
NumberItems=0;
ObjectType=0;
ObjectName={''};
ret = SelectObj.Group("DiagonalOrdinarySegment1");
ret = SelectObj.Group("DiagonalOrdinarySegment2");
[~,NumberItems,ObjectType,ObjectName] = SelectObj.GetSelected(NumberItems,ObjectType,ObjectName);
ret = SelectObj.ClearSelection;
frameDOS = string(ObjectName);
% Diagonal Ordinary Segment (VOS)
NumberItems=0;
ObjectType=0;
ObjectName={''};
ret = SelectObj.Group("VeticalOrdinarySegment");
[~,NumberItems,ObjectType,ObjectName] = SelectObj.GetSelected(NumberItems,ObjectType,ObjectName);
ret = SelectObj.ClearSelection;
frameVOS = string(ObjectName);
% Top Special Segment (TSS)
NumberItems=0;
ObjectType=0;
ObjectName={''};
ret = SelectObj.Group("TopSpecialSegment");
[~,NumberItems,ObjectType,ObjectName] = SelectObj.GetSelected(NumberItems,ObjectType,ObjectName);
ret = SelectObj.ClearSelection;
frameTSS = string(ObjectName);
% Bottom Special Segment (BSS)
NumberItems=0;
ObjectType=0;
ObjectName={''};
ret = SelectObj.Group("BottomSpecialSegment");
[~,NumberItems,ObjectType,ObjectName] = SelectObj.GetSelected(NumberItems,ObjectType,ObjectName);
ret = SelectObj.ClearSelection;
frameBSS = string(ObjectName);
% Diagonal Special Segment (DSS)
NumberItems=0;
ObjectType=0;
ObjectName={''};
ret = SelectObj.Group("DiagonalSpecialSegment");
[~,NumberItems,ObjectType,ObjectName] = SelectObj.GetSelected(NumberItems,ObjectType,ObjectName);
ret = SelectObj.ClearSelection;
frameDSS = string(ObjectName);
% Vertical Special Segment (VSS)
NumberItems=0;
ObjectType=0;
ObjectName={''};
ret = SelectObj.Group("VerticalSpecialSegment");
[~,NumberItems,ObjectType,ObjectName] = SelectObj.GetSelected(NumberItems,ObjectType,ObjectName);
ret = SelectObj.ClearSelection;
frameVSS = string(ObjectName);
%% get alltable
NumberTables = 0;
TableKey = {''};
TableName = {''};
ImportType = 0;
IsEmpty = NET.createArray('System.Boolean',NumberTables);
[ret,NumberTables,TableKey,TableName,ImportType,IsEmpty] = DatabaseTables.GetAllTables(NumberTables,TableKey,TableName,ImportType,IsEmpty);
TableKey = string(TableKey)';
TableName = string(TableName)';
ImportType = int32(ImportType)';
IsEmpty = logical(IsEmpty)';
TableKey = array2table(TableKey,"VariableNames",{'TableKey'});
TableName = array2table(TableName,"VariableNames",{'TableName'});
ImportType = array2table(ImportType,"VariableNames",{'ImportType'});
IsEmpty = array2table(IsEmpty,"VariableNames",{'IsEmpty'});
%Daftartabel = table(TableKey,TableName,ImportType,IsEmpty);
%Daftartabel = table2array(Daftartabel);
%% period of structure
TableVersion = zeros('int32');
FieldKeyList = {''};
FieldKeysIncluded = {''};
NumberRecords = zeros('int32');
TableData = {''};
[ret,~,TableVersion,FieldKeysIncluded,NumberRecords,TableData] = DatabaseTables.GetTableForDisplayArray("Modal Periods And Frequencies",FieldKeyList,'All',TableVersion,FieldKeysIncluded,NumberRecords,TableData);
TableVersion = int32(TableVersion);
FieldKeysIncluded = string(FieldKeysIncluded);
[ret,c,r] = size(FieldKeysIncluded);
c = int32(c);
r = int32(r);
NumberRecords = int32(NumberRecords);
TableData = cell(TableData);
TableData = reshape(TableData,c,[])';
Period{ii,:} = array2table(TableData,"VariableNames",FieldKeysIncluded);
%% Steel Design Check
TableVersion = zeros('int32');
FieldKeyList = {''};
FieldKeysIncluded = {''};
NumberRecords = zeros('int32');
TableData = {''};
[ret,~,TableVersion,FieldKeysIncluded,NumberRecords,TableData] = DatabaseTables.GetTableForDisplayArray("Steel Design 1 - Summary Data - AISC 360-10",FieldKeyList,'All',TableVersion,FieldKeysIncluded,NumberRecords,TableData);
TableVersion = int32(TableVersion);
FieldKeysIncluded = string(FieldKeysIncluded);
[ret,c,r] = size(FieldKeysIncluded);
c = int32(c);
r = int32(r);
NumberRecords = int32(NumberRecords);
TableData = cell(TableData);
TableData = reshape(TableData,c,[])';
steeldesignresult = array2table(TableData,"VariableNames",FieldKeysIncluded);
% check maximum ratio
ratio = steeldesignresult.Ratio(:);
ratio = strrep(ratio,',','.');
ratio = str2double(ratio);
maximumratio = sort(ratio,'descend');
maximumratio = maximumratio(1);
ratiolimit = 1.00;
if maximumratio<ratiolimit
checkratio(ii) = 'Ratio OK';
else
checkratio(ii) = 'Ratio exceeds allowable limit';
end
ratioCOL{ii,:} = steeldesignresult.Ratio(ismember(steeldesignresult.Frame,frameCOL));
ratioEND{ii,:} = steeldesignresult.Ratio(ismember(steeldesignresult.Frame,frameEND));
ratioTOS{ii,:} = steeldesignresult.Ratio(ismember(steeldesignresult.Frame,frameTOS));
ratioBOS{ii,:} = steeldesignresult.Ratio(ismember(steeldesignresult.Frame,frameBOS));
ratioDOS{ii,:} = steeldesignresult.Ratio(ismember(steeldesignresult.Frame,frameDOS));
ratioVOS{ii,:} = steeldesignresult.Ratio(ismember(steeldesignresult.Frame,frameVOS));
ratioTSS{ii,:} = steeldesignresult.Ratio(ismember(steeldesignresult.Frame,frameTSS));
ratioBSS{ii,:} = steeldesignresult.Ratio(ismember(steeldesignresult.Frame,frameBSS));
ratioDSS{ii,:} = steeldesignresult.Ratio(ismember(steeldesignresult.Frame,frameDSS));
ratioVSS{ii,:} = steeldesignresult.Ratio(ismember(steeldesignresult.Frame,frameVSS));
%% pushover result
% base-shear
TableVersion = zeros('int32');
FieldKeyList = {''};
FieldKeysIncluded = {''};
NumberRecords = zeros('int32');
TableData = {''};
[ret,~,TableVersion,FieldKeysIncluded,NumberRecords,TableData] = DatabaseTables.GetTableForDisplayArray("Base Reactions",FieldKeyList,'All',TableVersion,FieldKeysIncluded,NumberRecords,TableData);
TableVersion = int32(TableVersion);
FieldKeysIncluded = string(FieldKeysIncluded);
[ret,c,r] = size(FieldKeysIncluded);
c = int32(c);
r = int32(r);
NumberRecords = int32(NumberRecords);
TableData = cell(TableData);
TableData = reshape(TableData,c,[])';
basereaction = array2table(TableData,"VariableNames",FieldKeysIncluded);
filter1 = strcmp(basereaction.OutputCase,'Pushover-UX');
baseshearpushx = basereaction(filter1,{'StepNum','GlobalFX','GlobalFZ'});
% display displacement of monitored point
TableVersion = zeros('int32');
FieldKeyList = {''};
FieldKeysIncluded = {''};
NumberRecords = zeros('int32');
TableData = {''};
[ret,~,TableVersion,FieldKeysIncluded,NumberRecords,TableData] = DatabaseTables.GetTableForDisplayArray("Joint Displacements",FieldKeyList,'All',TableVersion,FieldKeysIncluded,NumberRecords,TableData);
TableVersion = int32(TableVersion);
FieldKeysIncluded = string(FieldKeysIncluded);
[ret,c,r] = size(FieldKeysIncluded);
c = int32(c);
r = int32(r);
NumberRecords = int32(NumberRecords);
TableData = cell(TableData);
TableData = reshape(TableData,c,[])';
jointdisplacement = array2table(TableData,"VariableNames",FieldKeysIncluded);
filter1 = strcmp(jointdisplacement.Joint,'4');
tableout1 = jointdisplacement(filter1,{'OutputCase','StepNum','U1'});
filter2 = strcmp(tableout1.OutputCase,'Pushover-UX');
point5disp = tableout1(filter2,{'StepNum','U1'});
% pushover table
pushovertable{ii,:} = join(baseshearpushx,point5disp);
plotx = str2double(strrep(pushovertable{ii,1}.U1,',','.'));
ploty = str2double(strrep(pushovertable{ii,1}.GlobalFX,',','.'));
%plot(plotx,ploty);
%xlabel('Displacement(m)');
%ylabel('Base Shear(kN)');
%grid on;
%% display hinge states
TableVersion = zeros('int32');
FieldKeyList = {''};
FieldKeysIncluded = {''};
NumberRecords = zeros('int32');
TableData = {''};
[ret,~,TableVersion,FieldKeysIncluded,NumberRecords,TableData] = DatabaseTables.GetTableForDisplayArray("Frame Hinge States",FieldKeyList,'All',TableVersion,FieldKeysIncluded,NumberRecords,TableData);
TableVersion = int32(TableVersion);
FieldKeysIncluded = string(FieldKeysIncluded);
[ret,c,r] = size(FieldKeysIncluded);
c = int32(c);
r = int32(r);
NumberRecords = int32(NumberRecords);
TableData = cell(TableData);
TableData = reshape(TableData,c,[])';
hingeresult{ii,:} = array2table(TableData,"VariableNames",FieldKeysIncluded);
filter = strcmp(hingeresult{ii,1}.OutputCase,'Pushover-UX') & ismember(hingeresult{ii,1}.Frame,frameCOL);
hingeCOL = hingeresult{ii,1}(filter,{'Frame','OutputCase','StepNum','GenHinge','RelDist','M3','R3Plastic','HingeState','HingeStatus'});
filter = strcmp(hingeresult{ii,1}.OutputCase,'Pushover-UX') & ismember(hingeresult{ii,1}.Frame,frameEND);
hingeEND = hingeresult{ii,1}(filter,{'Frame','OutputCase','StepNum','GenHinge','RelDist','M3','R3Plastic','HingeState','HingeStatus'});
%filter = strcmp(hingeresult{ii,1}.OutputCase,'Pushover-UX') & ismember(hingeresult{ii,1}.Frame,frameTOS);
%hingeTOS = hingeresult{ii,1}(filter,{'Frame','OutputCase','StepNum','GenHinge','RelDist','M3','R3Plastic','HingeState','HingeStatus'});
%filter = strcmp(hingeresult{ii,1}.OutputCase,'Pushover-UX') & ismember(hingeresult{ii,1}.Frame,frameBOS);
%hingeBOS = hingeresult{ii,1}(filter,{'Frame','OutputCase','StepNum','GenHinge','RelDist','M3','R3Plastic','HingeState','HingeStatus'});
%filter = strcmp(hingeresult{ii,1}.OutputCase,'Pushover-UX') & ismember(hingeresult{ii,1}.Frame,frameDOS);
%hingeDOS = hingeresult{ii,1}(filter,{'Frame','OutputCase','StepNum','GenHinge','RelDist','M3','R3Plastic','HingeState','HingeStatus'});
%filter = strcmp(hingeresult{ii,1}.OutputCase,'Pushover-UX') & ismember(hingeresult{ii,1}.Frame,frameVOS);
%hingeVOS = hingeresult{ii,1}(filter,{'Frame','OutputCase','StepNum','GenHinge','RelDist','M3','R3Plastic','HingeState','HingeStatus'});
filter = strcmp(hingeresult{ii,1}.OutputCase,'Pushover-UX') & ismember(hingeresult{ii,1}.Frame,frameTSS);
hingeTSS = hingeresult{ii,1}(filter,{'Frame','OutputCase','StepNum','GenHinge','RelDist','M3','R3Plastic','HingeState','HingeStatus'});
filter = strcmp(hingeresult{ii,1}.OutputCase,'Pushover-UX') & ismember(hingeresult{ii,1}.Frame,frameBSS);
hingeBSS = hingeresult{ii,1}(filter,{'Frame','OutputCase','StepNum','GenHinge','RelDist','M3','R3Plastic','HingeState','HingeStatus'});
%filter = strcmp(hingeresult{ii,1}.OutputCase,'Pushover-UX') & ismember(hingeresult{ii,1}.Frame,frameDSS);
%hingeDSS = hingeresult{ii,1}(filter,{'Frame','OutputCase','StepNum','GenHinge','RelDist','M3','R3Plastic','HingeState','HingeStatus'});
%filter = strcmp(hingeresult{ii,1}.OutputCase,'Pushover-UX') & ismember(hingeresult{ii,1}.Frame,frameVSS);
%hingeVSS = hingeresult{ii,1}(filter,{'Frame','OutputCase','StepNum','GenHinge','RelDist','M3','R3Plastic','HingeState','HingeStatus'});
%% check fuse first yielding
filter = strcmp(hingeresult{ii,1}.OutputCase,'Pushover-UX') & ismember(hingeresult{ii,1}.HingeState,{'B to C'});
firstyieldlist{ii,:} = hingeresult{ii,1}(filter,{'Frame','OutputCase','StepNum','GenHinge','RelDist','M3','R3Plastic','HingeState','HingeStatus'});
stepfirstyield = firstyieldlist{ii,1}.StepNum(:);
stepfirstyield = str2double(stepfirstyield);
stepfirstyield = sort(stepfirstyield,'ascend');
stepfirstyield = stepfirstyield(1);
stepfirstyield = int2str(stepfirstyield);
framefirstyield{ii,:} = firstyieldlist{ii,1}.Frame(strcmp(firstyieldlist{ii,1}.StepNum,stepfirstyield));
testfuse = ismember(framefirstyield{ii,1},[frameTSS,frameBSS]);
if testfuse == any(true)
checkfuse(ii) = 'Fuse Correct';
else
checkfuse(ii) = 'Fuse wrong designed';
end
end
end
end
end
end
end
end
end
end
end
end
toc
runningtime = toc;
%writecell(hingeresult,'hingeresult2173.xls')
writematrix(Specimen,'specimen2173.xls','Sheet',1)
writematrix(checkratio','checkratio2173.xls','Sheet',1)
writematrix(checkfuse','checkfuse2173.xls','Sheet',1)
%writecell(arrayfun(framefirstyield),'framefirstyield2173.xls','Sheet',1)
%writematrix(firstyieldlist,'firstyieldlist2173.xls','Sheet',1)
clc
0 Comments
Answers (1)
Stephen23
on 15 May 2024
Edited: Stephen23
on 15 May 2024
"Hi guys, im trying to do looping ii 1:900 but why when u run it, it was never-ending loop."
I already told you the reason why, in my comment to your previous question:
Get rid of the outermost loop. Your outermost loop basically duplicates all of the other loops:
GET RID OF THE OUTERMOST LOOP.
2 Comments
Stephen23
on 15 May 2024
"this one i dont understand may you give me the code directly based on my script?"
It is recommended to avoid meta-data in variable names, e.g. if you used e.g. the non-scalar structure as shown or similar approach then your code can be written in a more generalised way and likely without those deeply nested loops.
But that is just a recommended improvement.
To fix the bug you asked about in this thread, get rid of the outermost loop. That is all.
See Also
Categories
Find more on Data Type Identification in Help Center and File Exchange
Products
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!