1 view (last 30 days)
uzmeed on 30 Jan 2019
Commented: uzmeed on 4 Feb 2019
Hi
I need to receive the signal at different elemnents of UCA
I am using the following code
% First signal
t = linspace(0,0.3,300)';
t1= zeros(size(t));
t1(201:205)= 1;
% Second Signal
t2= zeros(size(t));
t2(101:105)= 1;
angle_of_arrival = [30;0];
x = collectPlaneWave(sUCA,[t1 t2],angle_of_arrival',fc);
subplot(221)
plot(t,abs(x(:,1))); title('Element 1 (magnitude)');
axis tight; ylabel('Magnitude');
subplot(222)
plot(t,abs(x(:,2))); title('Element 2 (magnitude)');
axis tight; ylabel('Magnitude');
subplot(223)
plot(t,abs(x(:,3))); title('Element 3 (magnitude)');
axis tight; xlabel('Seconds'); ylabel('Magnitude');
subplot(224)
plot(t,abs(x(:,4))); title('Element 4 (magnitude)');
axis tight; xlabel('Seconds'); ylabel('Magnitude');
The problem I am facing is that all the antennas are receving the same magnitude . But as far as my understanding the antenna at least one antenna should not receive the signal
Please suggest some thing Best Regards

Honglei Chen on 30 Jan 2019
Why would you say taht at least one antenna should not receive the signal? You are using isotropic element in the array so every element can receive the signal regardless the incoming direction. As to the magnitude, it is because the toolbox assumes that the signal is at far field so the signal strength is the same across the array.
HTH

uzmeed on 1 Feb 2019
Thank you HTH
One thing more if you can guide me
Is the RootMUSIC algorithm is specific to circular array of Radars or it can be used any system where the UCA is used like RWR or ELINT
Regards
Uzmeed
Honglei Chen on 4 Feb 2019
The algorithm is for general purpose, not specific to radar.
uzmeed on 4 Feb 2019
Thank you so much