Answered

Simulink simulation slows down drastically after first run following reboot

Since you run the model in Rapid Accelerator mode, have you tried deleting the slprj and _yourmodelname_.mexw64?

Simulink simulation slows down drastically after first run following reboot

Since you run the model in Rapid Accelerator mode, have you tried deleting the slprj and _yourmodelname_.mexw64?

2 years ago | 0

Answered

load mat table to gui table

If you are asking how to get the value of row 1 column 2 of your data2 cell, try no_plat = data2{1,2}; % get row 1 column 2...

load mat table to gui table

If you are asking how to get the value of row 1 column 2 of your data2 cell, try no_plat = data2{1,2}; % get row 1 column 2...

3 years ago | 0

Answered

What is the BlockType name for Lookup Tables?

Have you tried with: blks = find_system(Search_Path,'BlockType','Lookup_n-D');

What is the BlockType name for Lookup Tables?

Have you tried with: blks = find_system(Search_Path,'BlockType','Lookup_n-D');

4 years ago | 1

| accepted

Answered

Matlab - How to make graphs with different limits match using plotyy

Something like this? (not completely sure about the reverse part, though) date= [714262 724124 731733 734732 736209]; ...

Matlab - How to make graphs with different limits match using plotyy

Something like this? (not completely sure about the reverse part, though) date= [714262 724124 731733 734732 736209]; ...

4 years ago | 0

Answered

Comparing value in m x n matrices to find its index

Something like this? thresholdVAR = 3:0.5:7; GtrecMRCG2= [ 5 8 9 6 2 5 2 4 6 3 8 9 11]; % preallocate DesMat =...

Comparing value in m x n matrices to find its index

Something like this? thresholdVAR = 3:0.5:7; GtrecMRCG2= [ 5 8 9 6 2 5 2 4 6 3 8 9 11]; % preallocate DesMat =...

4 years ago | 0

| accepted

Answered

Follow up questions to original.

After you create your plot, create your own x-axis (or y-axis) label using xticklabel e.g. plot(1:4) grid on ...

Follow up questions to original.

After you create your plot, create your own x-axis (or y-axis) label using xticklabel e.g. plot(1:4) grid on ...

4 years ago | 0

Answered

wait for plot to finish

Hi, Perhaps you will need this? <http://nl.mathworks.com/help/matlab/ref/waitfor.html waitfor()>

wait for plot to finish

Hi, Perhaps you will need this? <http://nl.mathworks.com/help/matlab/ref/waitfor.html waitfor()>

4 years ago | 0

Answered

How do i get Char into Double

Maybe this will help? <http://nl.mathworks.com/help/matlab/ref/str2num.html str2num>

How do i get Char into Double

Maybe this will help? <http://nl.mathworks.com/help/matlab/ref/str2num.html str2num>

4 years ago | 0

Answered

How to plot one data set with two y axes?

% pb = 120; % cost of battery per kWh OfyStor = linspace(5,100,45); % percentage of the annual demand covered by the Cap...

How to plot one data set with two y axes?

% pb = 120; % cost of battery per kWh OfyStor = linspace(5,100,45); % percentage of the annual demand covered by the Cap...

4 years ago | 0

| accepted

Answered

Making Matrix Dimensions Equal

A = ones(5130,2); B = ones(2150,2); BA = vertcat(B,zeros(abs(length(A)-length(B)),2)); How come that this does no...

Making Matrix Dimensions Equal

A = ones(5130,2); B = ones(2150,2); BA = vertcat(B,zeros(abs(length(A)-length(B)),2)); How come that this does no...

4 years ago | 0

| accepted

Answered

How can I access the variables in base workspace in GUI?

This might work, evalin('base','temp = who(''signal_*'',''base'');assignin(''caller'',''all_signals'',temp)'); Hope tha...

How can I access the variables in base workspace in GUI?

This might work, evalin('base','temp = who(''signal_*'',''base'');assignin(''caller'',''all_signals'',temp)'); Hope tha...

4 years ago | 0

| accepted

Answered

Can i edit subplot?

You can use the script from the File Exchange for this.. <http://www.mathworks.com/matlabcentral/fileexchange/27991-tight-sub...

Can i edit subplot?

You can use the script from the File Exchange for this.. <http://www.mathworks.com/matlabcentral/fileexchange/27991-tight-sub...

4 years ago | 0

Answered

single plot, dft graph?

Perhaps this is what you want, xdat = 0:5:120; ydat = [62,57,56,55,57,56,58,62,62,63,61,61,62,62,62,61,60,60,60,61,65,68...

single plot, dft graph?

Perhaps this is what you want, xdat = 0:5:120; ydat = [62,57,56,55,57,56,58,62,62,63,61,61,62,62,62,61,60,60,60,61,65,68...

4 years ago | 0

Answered

How to gather code

Use double percentage signs %% to create a section on your code..

How to gather code

Use double percentage signs %% to create a section on your code..

4 years ago | 0

Answered

What methods do you use to bring the variable data from an external program or function into a guide GUI function file?

# Load required parameter into Matlab (base) workspace # Use <http://nl.mathworks.com/help/matlab/ref/evalin.html evalin()> to ...

What methods do you use to bring the variable data from an external program or function into a guide GUI function file?

# Load required parameter into Matlab (base) workspace # Use <http://nl.mathworks.com/help/matlab/ref/evalin.html evalin()> to ...

4 years ago | 0

| accepted

Answered

Change column and row

There are built-in matlab functions for this.. <http://nl.mathworks.com/help/matlab/ref/flipud.html flipud()> <http://nl.mat...

Change column and row

There are built-in matlab functions for this.. <http://nl.mathworks.com/help/matlab/ref/flipud.html flipud()> <http://nl.mat...

4 years ago | 0

Answered

Editing default simulink libraries

Is that even possible/allowed? What I usually do is using script to give the model "make-over" by using <http://nl.mathworks...

Editing default simulink libraries

Is that even possible/allowed? What I usually do is using script to give the model "make-over" by using <http://nl.mathworks...

4 years ago | 0

Answered

Obtain variable from running simulation

You may want to check this out.. <http://stackoverflow.com/questions/26999125/plotting-inside-matlab-function-block-for-real-...

Obtain variable from running simulation

You may want to check this out.. <http://stackoverflow.com/questions/26999125/plotting-inside-matlab-function-block-for-real-...

4 years ago | 0

| accepted

Answered

how to interface m file and simulink model?

Do you have this simulink model 'new_project.mdl' in your current/active folder?

how to interface m file and simulink model?

Do you have this simulink model 'new_project.mdl' in your current/active folder?

4 years ago | 0

Answered

how to start xlim from 2 rather than 1

What do you mean by _continue with 3 4 5 6 ... 333_? Perhaps something like this? set(gca,'xlim',[2 33]);

how to start xlim from 2 rather than 1

What do you mean by _continue with 3 4 5 6 ... 333_? Perhaps something like this? set(gca,'xlim',[2 33]);

4 years ago | 0

| accepted

Answered

Help with cell if statement

Perhaps something like this? if strcmpi(Gas_driven{n},'Air') == 1 R = 286.9; elseif strcmpi(Gas_driven{n},'A...

Help with cell if statement

Perhaps something like this? if strcmpi(Gas_driven{n},'Air') == 1 R = 286.9; elseif strcmpi(Gas_driven{n},'A...

4 years ago | 0

Answered

Question about finding y value for certain x value of a plot

If you have your plot data, desiredY = interp1(yourXaxisdata,yourYaxisdata,certainX);

Question about finding y value for certain x value of a plot

If you have your plot data, desiredY = interp1(yourXaxisdata,yourYaxisdata,certainX);

4 years ago | 1

| accepted

Answered

How to display y=0 in figure

r=[0.1:0.1:10]; y = zeros(length(r),1); epsilo=0.008909; sigma=3.326; E=4*0.008909*(sigma^12./r.^12-si...

How to display y=0 in figure

r=[0.1:0.1:10]; y = zeros(length(r),1); epsilo=0.008909; sigma=3.326; E=4*0.008909*(sigma^12./r.^12-si...

4 years ago | 0

| accepted

Answered

Export Simulink data to Excel during simulation

As far as I know, during the simulation the current simulation data (e.g. ToWorkspace) are _sort of_ not accessible. if you want...

Export Simulink data to Excel during simulation

As far as I know, during the simulation the current simulation data (e.g. ToWorkspace) are _sort of_ not accessible. if you want...

4 years ago | 0

Answered

HOW TO ADD ANNOTATION TO SIMUINK MODEL FROM MATLAB USING COMMANDS.

Hello, You need to put _the location_ of the notation as well in the second argument. So, add_block('built-in/Note',[...

HOW TO ADD ANNOTATION TO SIMUINK MODEL FROM MATLAB USING COMMANDS.

Hello, You need to put _the location_ of the notation as well in the second argument. So, add_block('built-in/Note',[...

4 years ago | 1

| accepted

Answered

How to split a matrix by a column by whether values are greater or less than a number

A = [5;3;6;1;7;8;2;3;4;8;6;5]; B = [45;25;36;87;45;14;2;31;59;6;47;2]; C = [4;5;8;6;11;14;9;5;1;19;3;10]; matt = [A,B...

How to split a matrix by a column by whether values are greater or less than a number

A = [5;3;6;1;7;8;2;3;4;8;6;5]; B = [45;25;36;87;45;14;2;31;59;6;47;2]; C = [4;5;8;6;11;14;9;5;1;19;3;10]; matt = [A,B...

4 years ago | 0

| accepted

Answered

Naming figures with existing filename

Perhaps this might works? figT = ['RGB ' (regexpi(baseFileName, (?<=IMG_)\d+', 'match', 'once'))]; figure('name', figT, ...

Naming figures with existing filename

Perhaps this might works? figT = ['RGB ' (regexpi(baseFileName, (?<=IMG_)\d+', 'match', 'once'))]; figure('name', figT, ...

4 years ago | 1

| accepted

Answered

Current system time as a Timestamp

fprintf('This message is sent at time %s\n', datestr(now,'HH:MM:SS.FFF'))

Current system time as a Timestamp

fprintf('This message is sent at time %s\n', datestr(now,'HH:MM:SS.FFF'))

4 years ago | 1

Answered

Split a row into several rows

The error message indicates *the error* very clear. What will be the dimension of the B matrix then? 5x4.9 matrix? Unless y...

Split a row into several rows

The error message indicates *the error* very clear. What will be the dimension of the B matrix then? 5x4.9 matrix? Unless y...

4 years ago | 1

Answered

Plot in figure window appears very small/unreadable in R2015b on Macbook pro Retina.

<http://www.mathworks.com/matlabcentral/answers/102946-why-does-the-matlab-desktop-look-blurry-when-using-matlab-r2013b-or-r2014...

Plot in figure window appears very small/unreadable in R2015b on Macbook pro Retina.

<http://www.mathworks.com/matlabcentral/answers/102946-why-does-the-matlab-desktop-look-blurry-when-using-matlab-r2013b-or-r2014...

4 years ago | 0