MathWorks MATLAB Hardware Team

MathWorks

Last seen: 9 days ago | Active since 2014

Statistics

All

Content Feed

Answered
Addressing 16-bit I2C register with Raspberry Pi
Hi Henrik, You can use write() and read() APIs for the same. Here is the code snippet that can help you, >> % Read the data ...

2 months ago | 0

Answered
MATLAB and Raspberry Pi connection problem
Hi, Seems like the Raspberry Pi needs to be setup first, you can do that by performing following steps, * Go to "Home" tab ...

2 months ago | 0

| accepted

Answered
How do I view the live video feed and capture images from my USB Webcam in MATLAB?
The Acquire Webcam Image MATLAB Live Task enables you to interactively: Capture images from a USB Webcam. Adjust the Webcam...

2 months ago | 0

| accepted

Answered
How to create a custom preview window for MATLAB webcam?
You can also try using the Acquire Webcam Image MATLAB Live Task. For more details refer to the following answer https://www.mat...

3 months ago | 0

Answered
How can I insert live video into a MATLAB GUI using Image Acquisition Toolbox?
You can also try using the Acquire Webcam Image MATLAB Live Task. For more details refer to the following answer https://www.mat...

3 months ago | 0

Answered
Using Webcam in GUI to view the image,capture image,save image and acquisition
You can also try using the Acquire Webcam Image MATLAB Live Task. For more details refer to the following answer https://www.mat...

3 months ago | 0

Question

How do I view the live video feed and capture images from my USB Webcam in MATLAB?
Is there an app in which I can view the USB webcam live video feed? Using the video feed I want to adjust the webcam properties ...

3 months ago | 1 answer | 0

1

answer

Submitted

MATLAB Support Package for Raspberry Pi Hardware
Acquire sensor and image data from your Raspberry Pi.

3 months ago | 261 downloads |

Submitted

MATLAB Support Package for Ryze Tello Drones
Control Ryze Tello drone from MATLAB and acquire sensor and image data

5 months ago | 36 downloads |

Submitted

MATLAB Support Package for Arduino Hardware
Acquire inputs and send outputs on Arduino boards

5 months ago | 1053 downloads |

Answered
Arduino Nano 33 BLE to MATLAB
Hi EB, Kindly note that the support for Nano33BLE will be available from R2021a onward through the MATLAB Support Package for A...

5 months ago | 2

Answered
Failed to read i2c device's register with MATLAB Support Package for Raspberry Pi Hardware
Hi FlyWing, Can you please perform following steps and see in all three cases you are getting same values, if not then please c...

8 months ago | 0

Answered
Why does disableI2C() stalls the Raspberry Pi?
This is due to the upstream Linux issue for BCM 2835 based devices. This issue has been reported in following Raspberry Pi forum...

10 months ago | 0

| accepted

Question

Why does disableI2C() stalls the Raspberry Pi?
I have a Raspberry Pi 3B+ with MathWorks customized Raspbian image for R2020b. When I execute following commands, I see an erro...

10 months ago | 1 answer | 0

1

answer

Submitted

MATLAB Support Package for Parrot Drones
Control Parrot drones from MATLAB and acquire sensor data

10 months ago | 33 downloads |

Submitted

MATLAB Support Package for BeagleBone Black Hardware
Interact with BeagleBone Black from MATLAB

10 months ago | 23 downloads |

Answered
does it is possible to live stream video in matlab with H.264 codec
Hi Haris, MATLAB will be supporting H.264 encoded RTSP streams for IP Cameras through MATLAB Support Package for IPCameras in t...

11 months ago | 1

Answered
Read data from Arduino Nano 33 IoT IMU sensor
Hi Matthias, I see that you are using a correct subset of I2C APIs documented to read out the sensor register...

1 year ago | 0

| accepted

Submitted

MATLAB Support Package for LEGO MINDSTORMS EV3 Hardware
Acquire sensor data and control outputs on LEGO MINDSTORMS EV3

1 year ago | 33 downloads |

Answered
Can I connect the VCC and GND pins of the NeoPixel addon directly to the VCC and GND pins of Arduino?
No, as the NeoPixel requires high current which cannot be supplied by the Arduino board. For power supply specifications of Ne...

1 year ago | 1

Question

Can I connect the VCC and GND pins of the NeoPixel addon directly to the VCC and GND pins of Arduino?
Can I connect the VCC and GND pins of the NeoPixel addon directly to the VCC and GND pins of Arduino?

1 year ago | 1 answer | 0

1

answer

Answered
In the Capacitive Sensor addon, can I use an analog pin on the Arduino board as the ‘sendPin’ or ‘receivePin’?
This depends on the Arduino board. In some boards like the Leonardo, you cannot use an analog pin as a digital pin. To check if ...

1 year ago | 0

Question

In the Capacitive Sensor addon, can I use an analog pin on the Arduino board as the ‘sendPin’ or ‘receivePin’?
In the Capacitive Sensor addon, can I use an analog pin on the Arduino board as the ‘sendPin’ or ‘receivePin’?

1 year ago | 1 answer | 0

1

answer

Answered
How can I find the state of the SA0 pin and the DeviceType for LSM303 or L3G addons when it cannot be auto detected by MATLAB Arduino support package?
For details on the SA0 pin, see section ‘I2C Communication’ https://www.pololu.com/product/2127. The ‘Device type’ of the de...

1 year ago | 0

| accepted

Question

How can I find the state of the SA0 pin and the DeviceType for LSM303 or L3G addons when it cannot be auto detected by MATLAB Arduino support package?
How can I find the state of the SA0 pin and the DeviceType for LSM303 or L3G addons when it cannot be auto detected by MATLAB Ar...

1 year ago | 1 answer | 0

1

answer

Submitted

1-Wire Add-On Library for Arduino
Communicate with 1-Wire devices connected to Arduino hardware in MATLAB.

2 years ago | 8 downloads |

Submitted

DHT22 Add-On Library for Arduino
Arduino Add-on library for the DHT22 Temperature and Humidity Sensor

2 years ago | 27 downloads |

Submitted

L3G Add-On Library for Arduino
Communicate with L3G devices connected to Arduino hardware in MATLAB.

2 years ago | 4 downloads |

Submitted

NeoPixel Add-On Library for Arduino
Control NeoPixel LED strips connected to Arduino hardware in MATLAB.

2 years ago | 12 downloads |

Submitted

Capacitive Sensor Add-On Library for Arduino
Communicate with capacitive sensor built with two Arduino pins in MATLAB

2 years ago | 3 downloads |