Main Content

Parameters and Procedures

Real-time application creation from a Simulink® model

Prepare your design for generating a real-time application by updating your Simulink model. Select a fixed-step solver and select Simulink Real-Time™ as the code generator target. Extend your Simulink model with blocks from the Speedgoat I/O Blockset or the Simulink Real-Time block library. Make signal connections between these driver blocks and other blocks in your model, then build the real-time application.

Simulink Configuration Parameters


ApplicationRepresent application files on development computer


addParamSetAdd a parameter set to a real-time application
extractASAP2Extract generated A2L file from real-time application file
getInformationGet real-time application information
getParametersGet real-time application parameters
getSignalsGet real-time application signals
updateRootLevelInportDataReplace external input data in real-time application with input data
updateStartupParameterSetUpdate the startup parameter set for an application


I/O Driver Blocks

Learn about the Simulink Real-Time I/O library of driver blocks.

Add I/O Blocks to Simulink Model

Interface with boards by using Simulink Real-Time library blocks.

Configure Block Parameters

Configure model blocks.

Define and Update Inport Data

Map root inports to source data.

Simulink Real-Time Options Pane

Configure initial values for real-time application options.

TLC Command-Line Options

Configure the real-time application and the real-time RTOS.