I found this paper that was hlepful https://www.inmotive.com/s/Ingear-Simulation-Instructions-EW06.pdf
How to add gearbox in EV reference application Driveline?
2 views (last 30 days)
Show older comments
BLOSSOM FERNANDEZ
on 24 Aug 2022
Commented: BLOSSOM FERNANDEZ
on 7 Aug 2023
I do not have access to simscape. In my application, I have a motor connected to a fixed ratio reduction gearbox and that is connected to the transfer case (for my four wheel drive). I need to add a gear box in the drive-line model under the EV reference application example.
cd(setupExample('autoblks/EVReferenceApplicationExample'));helpersetupev
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1107150/image.png)
What additional blocks do I need to add with the gearbox block in order for it to work? more torsional blocks before and after the gearbox? inertia blocks?
The feeback vehcile velocity does not follow the reference velocity with all the different types of connections I have tired so far.
Accepted Answer
Jongil Lee
on 7 Aug 2023
Dear all
I suggest to use 2-way connector instead of Simulink port. Please refer to see below snapshot.
You can change port type from menu.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1452627/image.png)
More Answers (0)
See Also
Categories
Find more on Powertrain Blockset in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!