Asynchronous machine SI unit output to inverter?

I'm now trying to construct the generator modle inllike the pictu below. And I want to calculate the power generation from the generator. In order to do that I need to I need to turn the three phase voltage into DC voltage but I can't connect it to diode or any block to finish the same job.Can anyone help me with this question?

[Milan Bansal]

Hi Yanshu,

It will be great if you can provide this simulink file.

Thanks!

Answer 1

[Adeline]

Hi,

I understand you are trying to model a generator in Simulink to analyse its power generation.

The Simscape library contains various blocks which can be used to convert and rectify power. For the current model, consider using the “Average-Value Rectifier (Three-Phase)” block to convert three phase AC voltage into DC voltage.

To analyse physical systems using Simulink, the "PS-Simulink Converter" and "Simulink-PS Converter" blocks can be used to connect the Simscape diagrams to Simulink sources and scopes.

For detailed information on the list of blocks in Simscape which can be used to convert and rectify power, please refer to the following link:

https://www.mathworks.com/help/sps/converters.html

For more information on the "PS-Simulink Converter" and "Simulink-PS Converter" blocks, please refer to the following links:

https://www.mathworks.com/help/simscape/ref/simulinkpsconverter.html

https://www.mathworks.com/help/simscape/ref/pssimulinkconverter.html

Hope this information was helpful.