Issue Related to Interfacing simulink with arduino hardware

• Hi. This is the error I am getting. I had installed the simulink for arduino add on for hardware support
• And also sort for the COM port issue as mentioned in your web site
• ### Starting build procedure for: Lab_1_2 "### Generating static library." "F:/waqas/bin/win64/gmake" -j5 -C "C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1" SHELL="%SystemRoot%/system32/cmd.exe" -f avrcore.mk all gmake[1]: Entering directory C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1' "### Successfully generated libcore.a library." gmake[1]: Leaving directory C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1' "F:/waqas/bin/win64/gmake" -j5 SHELL="%SystemRoot%/system32/cmd.exe" -f "Lab_1_2.mk" all gmake[1]: Entering directory F:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw' "C:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/bin/avr-g++" -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"MW_arduino_digitalio.dep" -MT"MW_arduino_digitalio.o" -Os -g -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DXCP_ADDRESS_GRANULARITY=XCP_ADDRESS_GRANULARITY_BYTE -DCODERTARGET_XCP_DAQ_PACKED_MODE -DCODERTARGET_XCP_MAX_CONTIGUOUS_SAMPLES=2 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -DARDUINO_NUM_SERIAL_PORTS=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_CONFIG_SERIAL0_=SERIAL_8N1 -D_RTT_ANALOG_REF_=0 -DMW_RTIO_SERIAL0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_EXTMODE_SIMULATION_TIME_IN_TICKS -DXCP_DAQ_SUPPORT -DXCP_CALIBRATION_SUPPORT -DXCP_TIMESTAMP_SUPPORT -DXCP_TIMESTAMP_BASED_ON_SIMULATION_TIME -DXCP_SET_MTA_SUPPORT -DEXTMODE_XCP_TRIGGER_SUPPORT -DXCP_MEM_BLOCK_1_SIZE=32 -DXCP_MEM_BLOCK_1_NUMBER=1 -DXCP_MEM_BLOCK_2_SIZE=56 -DXCP_MEM_BLOCK_2_NUMBER=1 -DXCP_MEM_BLOCK_3_SIZE=8 -DXCP_MEM_BLOCK_3_NUMBER=1 -DXCP_MEM_RESERVED_POOLS_TOTAL_SIZE=212 -DXCP_MEM_RESERVED_POOLS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOL_BLOCKS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOLS_NUMBER=1 -DXCP_MIN_EVENT_NO_RESERVED_POOL=1 -DXCP_MAX_CTO_SIZE=32 -DXCP_MAX_DTO_SIZE=65532 -DXCP_MAX_ODT_ENTRY_SIZE=255 -DEXTMODE_STATIC -DEXTMODE_STATIC_SIZE=250 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Lab_1_2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IF:/ACE Box/Lab 1.2 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/include -IF:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw -IF:/waqas/extern/include -IF:/waqas/simulink/include -IF:/waqas/rtw/c/src -IF:/waqas/rtw/c/src/ext_mode/common -IF:/waqas/rtw/c/ert -IF:/waqas/toolbox/coder/xcp/src/target/server/include -IF:/waqas/toolbox/coder/xcp/src/target/server/common -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/src -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/src -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/include -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/default -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/include -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/src -IF:/waqas/toolbox/coder/rtiostream/src -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include -
• IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/avr/include/avr -o "MW_arduino_digitalio.o" "C:/ProgramData/MATLAB/SupportPackages/R2023b/toolbox/target/supportpackages/arduinobase/src/MW_arduino_digitalio.cpp" "C:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/bin/avr-gcc" -std=gnu11 -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"xcp_ext_mode.dep" -MT"xcp_ext_mode.o" -Os -g -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DXCP_ADDRESS_GRANULARITY=XCP_ADDRESS_GRANULARITY_BYTE -DCODERTARGET_XCP_DAQ_PACKED_MODE -DCODERTARGET_XCP_MAX_CONTIGUOUS_SAMPLES=2 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -DARDUINO_NUM_SERIAL_PORTS=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_CONFIG_SERIAL0_=SERIAL_8N1 -D_RTT_ANALOG_REF_=0 -DMW_RTIO_SERIAL0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_EXTMODE_SIMULATION_TIME_IN_TICKS -DXCP_DAQ_SUPPORT -DXCP_CALIBRATION_SUPPORT -DXCP_TIMESTAMP_SUPPORT -DXCP_TIMESTAMP_BASED_ON_SIMULATION_TIME -DXCP_SET_MTA_SUPPORT -DEXTMODE_XCP_TRIGGavr-g++: error: Box/Lab: No such file or directory ER_SUPPORT -DXCP_MEM_BLOCK_1_SIZE=32 -DXCP_MEM_BLOCK_1_NUMBER=1 -DXCP_MEM_BLOCK_2_SIZE=56 -DXCP_MEM_BLOCK_2_NUMBER=1 -DXCP_MEM_BLOCK_3_SIZE=8 -DXCP_MEM_BLOCK_3_NUMBER=1 -DXCP_MEM_RESERVED_POOLS_TOTAL_SIZE=212 -DXCP_MEM_RESERVED_POOLS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOL_BLOCKS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOLS_NUMBER=1 -DXCP_MIN_EVENT_NO_RESERVED_POOL=1 -DXCP_MAX_CTO_SIZE=32 -DXCP_MAX_DTO_SIZE=65532 -DXCP_MAX_ODT_ENTRY_SIZE=255 -DEXTMODE_STATIC -DEXTMODE_STATIC_SIZE=250 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Lab_1_2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IF:/ACE Box/Lab 1.2 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/include -IF:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw -IF:/waqas/extern/include -IF:/waqas/simulink/include -IF:/waqas/rtw/c/src -IF:/waqas/rtw/c/src/ext_mode/common -IF:/waqas/rtw/c/ert -IF:/waqas/toolbox/coder/xcp/src/target/server/include -IF:/waqas/toolbox/coder/xcp/src/target/server/common -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/src -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/src -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/include -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/default -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/include -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/src -IF:/waqas/toolbox/coder/rtiostream/src -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/avr/include/avr -o "xcp_ext_mode.o" "F:/waqas/toolbox/coder/xcp/src/target/ext_mode/src/xcp_ext_mode.c" avr-g++: error: 1.2: No such file or directory avr-g++: error: Box/Lab: No such file or directory avr-g++: error: 1.2/Lab_1_2_ert_rtw: No such file or directory gmake[1]: *** No rule to make target F:/ACE', needed by Lab_1_2.o'. Stop. gmake[1]: *** Waiting for unfinished jobs.... gmake[1]: *** [MW_arduino_digitalio.o] Error 1 avr-gcc: error: Box/Lab: No such file or directory avr-gcc: error: 1.2: No such file or directory avr-gcc: error: Box/Lab: No such file or directory avr-gcc: error: 1.2/Lab_1_2_ert_rtw: No such file or directory gmake[1]: *** [xcp_ext_mode.o] Error 1 gmake[1]: Leaving directory F:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw' gmake: *** [all] Error 2 The make command returned an error of 2 ### Build procedure for Lab_1_2 aborted due to an error. Build Summary Top model targets built: Model Action Rebuild Reason =================================================================== Lab_1_2 Failed Code generation information file does not exist. 0 of 1 models built (0 models already up to date) Build duration: 0h 2m 8.7477s

Answer 1

[Mohith Prabhu]

Hello Shahab

The issue you are seeing is due to space in the current working directiry path " F:/ACE Box/Lab 1.2". Navigate to an alternate path without spaces in the folder name and retry the model build.

Hope this help

Regards,

Mohith

[SHAHAB]

Thanks for your help. It works now :)