7 views (last 30 days)

Hi everyone, I met a error mentioned in my title, however, i don't think my code could be organized by a solver-based approach. (I am trying with the problem-based approach).

y=optimvar('y',[4,1,4],'Type','integer','LowerBound',0,'UpperBound',1);

yi=[y(1,1,1),y(2,1,1),y(3,1,1),y(4,1,1);y(2,1,1),y(2,1,1),y(3,1,1),y(4,1,1);y(3,1,1),y(3,1,1),y(3,1,1),y(4,1,1);y(4,1,1),y(4,1,1),y(4,1,1),y(4,1,1)]; %create binary decision variable yit

yi(:,:,2)=[y(1,1,2),y(2,1,2),y(3,1,2),y(4,1,2);y(2,1,2),y(2,1,2),y(3,1,2),y(4,1,2);y(3,1,2),y(3,1,2),y(3,1,2),y(4,1,2);y(4,1,2),y(4,1,2),y(4,1,2),y(4,1,2)];

yi(:,:,3)=[y(1,1,3),y(2,1,3),y(3,1,3),y(4,1,3);y(2,1,3),y(2,1,3),y(3,1,3),y(4,1,3);y(3,1,3),y(3,1,3),y(3,1,3),y(4,1,3);y(4,1,3),y(4,1,3),y(4,1,3),y(4,1,3)];

yi(:,:,4)=[y(1,1,4),y(2,1,4),y(3,1,4),y(4,1,4);y(2,1,4),y(2,1,4),y(3,1,4),y(4,1,4);y(3,1,4),y(3,1,4),y(3,1,4),y(4,1,4);y(4,1,4),y(4,1,4),y(4,1,4),y(4,1,4)];

qijTemp=randi(10,4); %create a 4x4 OD matrix with random volumes between 0-10

qij0=tril((qijTemp-diag(diag(qijTemp))),-1)+((tril(qijTemp-diag(diag(qijTemp)),-1))).'

r1=0.05;%annual demand growth rate

r2=0.1;%annual demand growth rate caused by the completion of rail routes

d=[0 20 30 35].';%di distance beween links 1-4. d1=0 since link 0-1 does not exist.

Hb0=0.25;% Bus headway in time period 0 (starting time period) 0.25hrs/bus

Hr0=0;% Train headway in time perid 0 (starting time period) 0 hrs/train since rail starts

ub=10;%cost of buses in $/hour

nc=6;%number of cars per train

uc=50;%cost of rail cars in $/car

L=500;%rail maintenance cost in $/mile

k=1000;%rail construction cost in $/mile

td=0.08;%dwell time for bus and rail in hours

vb=40;% bus operating speed

vr=60;% train operating speed

u=10; %user value of time in dollars per hour

N=4;

qij=zeros(4,4,N);

hb=optimexpr(4);

hr=optimexpr(4);

for t=1:N

if t==1

qij(:,:,t)=qij0;

yi(:,:,t)=zeros(4,4);

sij(:,:,t)=zeros(4,4);

else

qij(:,:,t)=qij(:,:,t-1)*(1+r1).^t*((1/8)*(1+sij(:,:,t)).^t);

end

hb(t)=2*sqrt(2*(1-yi(1,:,t))*d/vb+sum((1-yi(1,:,t))*td)*ub/(sum((1-yi(:,:,t)).*qij(:,:,t)))); %error

hr(t)=2*sqrt((2*yi(1,:,t)*d/vr+sum(yi(1,:,t)*td))*nc*uc/sum(y(:,:,t).*qij(:,:,t))); %error

end

% Thank you so much for helping me check this code. The error happened at hb(t) and hr(t)

Harsha Priya Daggubati
on 8 Aug 2019

You can refer to the following link where a similar error was resolved:

Sign in to comment.

Sign in to answer this question.

Opportunities for recent engineering grads.

Apply Today
## 1 Comment

## Direct link to this comment

https://au.mathworks.com/matlabcentral/answers/473558-error-division-by-an-optimizationvariable-not-supported#comment_728568

⋮## Direct link to this comment

https://au.mathworks.com/matlabcentral/answers/473558-error-division-by-an-optimizationvariable-not-supported#comment_728568

Sign in to comment.