Simulink - Reflow Hot Plate PID Control
1 view (last 30 days)
Show older comments
I was inspired by the Reflow Hot Plate video and would like to create my own design with ATtiny202 MCU and Triac control. Although I have designed analog circuits already and I am working on ATtiny202 software I don't have any experience with Simulink.
I approximated the recommended Reflow Profile by 7th order polynomial (1,10396515946915E-13 -1,21806142019230E-10 5,19718805718757E-08 -1,10950838547447E-05 1,33548467063687E-03 -1,06064352764995E-01 6,77204249729155E+00 -1,13172803799129E+02).
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/490290/image.jpeg)
The Triac control will be in 2% increments from 0; 2%, 4% ... 100% by Zero Detect Crossing of 220V/50Hz power. I.e. I will turn on the Triac every two full half-waves in the 1 second period, when I measure the temperature of the hot plate (1 000 W) and adjust the power for another second accordingly.
I assume that I will measure the actual temperature rise over time as a function of the set power to get the function of the rate of temperature rise as a function of time e.g. for power = 26%, 50%, 76% and 100%.
Any idea how to start with the Simulink I have to buy yet to autotune the PID coefficients?
0 Comments
Answers (0)
See Also
Categories
Find more on PID Controller Tuning in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!