MATLAB Answers

How To Move OFDM Signal From BaseBand

27 views (last 30 days)
yuvi
yuvi on 26 May 2011
Commented: chiju on 11 Jun 2014
hi everybody
if anyone knows how to move this signal (bw=20MHz)
and to move it from 0-20MHz to 1920MHz-1940MHz
any help will be appreciated !
Here is the code :
clear all
nFFTSize =64 ;
% for each symbol bits a1 to a52 are assigned to subcarrier
% index [-26 to -1 1 to 26]
subcarrierIndex = [-26:-1 1:26];
nBit = 2500;
ip = rand(1,nBit) > 0.5; % generating 1's and 0's
nBitPerSymbol = 52;
nSymbol = ceil(nBit/nBitPerSymbol);
% BPSK modulation
% bit0 --> -1
% bit1 --> +1
ipMod = 2*ip - 1; %2500 {0 or 1]
ipMod = [ipMod zeros(1,nBitPerSymbol*nSymbol-nBit)]; % 1 x 2548
ipMod = reshape(ipMod,nSymbol,nBitPerSymbol); % 49 x 52
figure(1)
plot(ipMod)
st = []; % empty vector
for ii = 1:nSymbol
inputiFFT = zeros(1,nFFTSize);
% assigning bits a1 to a52 to subcarriers [-26 to -1, 1 to 26]
inputiFFT(subcarrierIndex+nFFTSize/2+1) = ipMod(ii,:);
% shift subcarriers at indices [-26 to -1] to fft input indices [38 to 63]
inputiFFT = fftshift(inputiFFT);
outputiFFT = ifft(inputiFFT,nFFTSize);
% adding cyclic prefix of 16 samples
outputiFFT_with_CP = [outputiFFT(49:64) outputiFFT];
st = [st outputiFFT_with_CP];
end
close all
fsMHz = 20;
[Pxx,W] = pwelch(st,[],[],4096,20);
figure(1)
plot([0:4095]*fsMHz/4095,10*log10(fftshift(Pxx)));
xlabel('frequency, MHz')
ylabel('power spectral density')
title('Transmit spectrum OFDM (based on 802.11a)');

  1 Comment

chiju
chiju on 11 Jun 2014
please any idea on how to find the PAPR and spectrum of an OFDM baseband signal?

Sign in to comment.

Answers (1)

Yella
Yella on 14 Jun 2011
Do frequency modulation.....
or else do upsampling of the signal that is increasing the sampling rate by padding zeros

  1 Comment

chiju
chiju on 11 Jun 2014
please any idea on how to find the PAPR and spectrum of an OFDM baseband signal?

Sign in to comment.

Sign in to answer this question.

Tags