1,504 results

A Toolbox for use with Pico Technology Instrument Drivers.

The PicoScope Support Toolbox provides a set of classes and functions for use with Pico Technology Instrument Drivers or calling the shared library Application Protocol Interface (API) functions

MATLAB Instrument Driver for use with PicoScope 5000 Series oscilloscopes

MATLAB Instrument Driver for use with PicoScope 5000 Series Flexible Resolution oscilloscopes .Supported models:The driver will work with the following PicoScope models:* PicoScope 5242A/B/D/D MSO

MATLAB Instrument Driver for use with PicoScope 4000 oscilloscopes (Beta Release)

This MATLAB® Generic Instrument Driver allows you to acquire data from the PicoScope® 4000 Series high resolution oscilloscopes and control in-built signal generator functionality. The data could be

MATLAB Instrument Driver for use with PicoScope 2000 Series Oscilloscopes and MSOs (Beta Release)

This MATLAB® Generic Instrument Driver allows you to acquire data from the PicoScope® 2000 Series USB oscilloscopes and mixed signal oscilloscopes, and control signal generator functionality. The

MATLAB Instrument Driver for use with PicoScope 4000 Series oscilloscopes (Beta Release)

This MATLAB® Generic Instrument Driver allows you to acquire data from PicoScope® 4000 Series High Resolution and Automotive Oscilloscopes and control in-built signal generator functionality. The

Generate code optimized for C2000 MCU.

NOTE: This support package is no longer supported by MathWorks. It is recommended that you use C2000 Microcontroller Blockset which includes the support for latest Texas Instruments™ C2000

Files to connect, query, and disconnect from the Pico Technology USB TC-08, using DLL's.

handle = usbtc08connect(types, tc08Path) configures the USB Pico Technology TC-08 data logger where types is a string or a vector array of strings of the respective channel types e.g. 'K' for type K

MATLAB Instrument Driver for use with PicoScope 3000 Series oscilloscopes (Beta release)

This MATLAB® Generic Instrument Driver allows you to acquire data from the PicoScope® 3000 Series High-Performance Oscilloscopes and control signal generator functionality. The data could be

MATLAB Instrument Driver for use with PicoScope 2000 Series oscilloscopes (Beta Release)

This MATLAB® Generic Instrument Driver allows a user to acquire block and streaming data from the PicoScope® 2000 Series Oscilloscopes and control in-built signal generator functionality. The data

Acquire and analyze data from NI-DAQmx devices.

Data Acquisition Toolbox™ Support Package for National Instruments® NI-DAQmx Devices enables you to communicate with the National Instruments hardware remotely from a computer running MATLAB®. Using

The technology behind the Makeinstall tool.

VXI Technology VM1548 TTL Input/Output Module MATLAB instrument driver

This is a MATLAB® instrument driver for use with v2.0 of the Instrument Control Toolbox™ and higher. It supports the VXI Technology, Inc. VM1548 TTL input/output module.It is a MATLAB

Control instruments using NI-VISA.

Instrument Control Toolbox™ Support Package for National Instruments® VISA and ICP Interfaces enable you to to control instruments, make measurements, analyze data, and build test systems. Once data

Retrieves data from a running instance of PicoLog Recorder via DDE.

These files can be used to retrieve data from a running instance of PicoLog Recorder via DDE. This can also return calculated parameters generated in PicoLog (in contrast to using the DLL approach

MATLAB Instrument Driver for use with PicoScope 6000 Series oscilloscopes (Beta Release)

This MATLAB® Generic Instrument Driver allows you to acquire data from the PicoScope® 6000 Series oscilloscopes and control signal generator functionality. The data could be processed in MATLAB using

Control instruments using Keysight (Agilent) VISA.

Instrument Control Toolbox™ Support Package for Keysight™ IO Libraries and VISA Interface enable you to to control instruments, make measurements, analyze data, and build test systems. Once data is

Communicate with instruments that use IVI or VXIplug&play drivers

Instrument Control Toolbox™ Support Package for IVI and VXIplug&play Drivers provides support for popular instruments that are delivered with IVI-C or VXIplug&play drivers. When this support

Small collection of functions for interfacing with confocal microscopes made by Prairie Technologies

Prairie Technologies MATLAB Toolbox-----------------------------------------This is a small collection of MATLAB functions that allow simple interfacing with confocal microscopes made by Prairie

Control NI-FGEN devices and create arbitrary waveforms.

Instrument Control Toolbox™ Support Package for National Instruments® NI-FGEN Function Generators enables you to communicate with NI-FGEN function generators remotely from a computer running MATLAB

Use NI-845x I2C/SPI devices to connect to your chips, circuit boards, sensors.

Instrument Control Toolbox™ Support Package for National Instruments® NI-845x I2C/SPI Interface enables you to use the NI-845x adaptor to communicate using I2C or SPI interfaces to your chips

Example MATLAB scripts demonstrating how to communicate with PicoScope® 9000 Series Oscilloscopes

This is a set of examples demonstrating how to control the PicoScope® 9200 and PicoScope 9300 Series PC Sampling Oscilloscopes using ActiveX with MATLAB®. The examples consist of MATLAB code which

Control instruments using Rohde & Schwarz VISA (R&SVISA)

Instrument Control Toolbox™ Support Package for R&S® VISA Interface enables you to control instruments, make measurements, analyze data, and build test systems. Once data is in MATLAB® , you can

MATLAB instrument driver for Ocean Optics OmniDriver which supports a wide range of spectrometers

MATLAB is a software environment and programming language used to configure and control instruments such as spectrometers, filter signals, make measurements, analyze data, and build test

MATLAB examples for use with the PicoScope 5203 and 5204 oscilloscopes.

Flexible Resolution Oscilloscopes - these are supported by the PicoScope 5000 Series - MATLAB Generic Instrument

MATLAB examples for use with the PicoScope 3000 series oscilloscopes using the ps3000 API functions.

examples are not compatible with the PicoScope 3000A/B/D/MSO/D MSO Series models - these are supported by the PicoScope 3000 Series - MATLAB Generic Instrument Driver

Read a National Instruments USB-TC01 single channel thermometer from MATLAB®

National Instrument USB-TC01 device was added to Data Acquisition Toolbox in R2011b. If you have R2010b or R2011a, you can use this file plus the Data Acquisition Toolbox to collect data from this device

Send commands to picomotor 8742 controller

Newport.USBComm.USB object. Then you can communicate with the 8742 by writing and querying normal serial commands.The included function is pretty bare bones and doesn't return any instrument errors or close the

Control and acquire data from NI-SCOPE devices.

Instrument Control Toolbox™ Support Package for National Instruments® NI-SCOPE Oscilloscopes enables you to communicate with NI-SCOPE oscilloscopes remotely from a computer running MATLAB®. You can

VXI Technology VM2716 Scanning Voltmeter MATLAB instrument driver

This is a MATLAB® instrument driver for use with v2.0 of the Instrument Control Toolbox™ and higher. It supports the VXI Technology, Inc. VM2716 scanning voltmeter.It is a MATLAB VXIplug&play

MATLAB examples for use with PicoLog 1000 Series data loggers.

This is a set of MATLAB files allowing you to interface to the PicoLog 1000 Series data loggers from MATLAB. An example is provided as a MATLAB script demonstrating how to call shared library

Control Arduino RGB LED over serial using MATLAB App Designer

MATLAB:eval(webread('https://git.io/fjP5c'))INFOApp Designer has visual instrumentation components (knobs, swithes, etc.) so it allows you to build interactive apps for instrument control.The submission contains a scheme of Arduino based simple

Remote control racecar programmed using Simulink, integrating vehicle dynamics controllers and CAN

This submission contains Simulink® models developed for a Texas Instruments C2000 based remote control racecar platform that provides a great introduction to Simulink hardware programming. The models

Simulate 3GPP 5G radio technologies

: https://www.mathworks.com/products/5g.html-------------------------------------------------------------------------------------------------------------------------------5G Library for LTE System Toolbox (version 18.1.0.0)The 5G Library for LTE System Toolbox enables you to explore the behavior and performance of 5G radio access technologies as defined by the Release

Communicate with I2C or SPI devices using Total Phase Aardvark I2C/SPI board.

Instrument Control Toolbox™ Support Package for Total Phase Aardvark I2C/SPI™ Interface enables you to use the Total Phase Aardvark adaptor to communicate, using I2C or SPI interfaces, with your

A Toolbox for use with PicoVNA Vector Network Analyzer products in MATLAB.

The PicoVNA Vector Network Analyzer Toolbox provides a set of functions and examples for use with Pico Technology PicoVNA(TM) Vector Network Analyzer products directly from MATLAB. This toolbox

Using Data Translation Measurement Instruments with MATLAB through IVI-COM

Using the MATLAB® Instrument Control Toolbox™, you can access the functions of Data Translation's measurement instruments (TEMPpoint, VOLTpoint, and MEASURpoint). The Instrument Control Toolbox

Real time data collection & plotting using query based instrument interactions.

predefined stop time is reached. This example also demonstrates automating a query based interaction with an instrument while monitoring the results live. This script can be modified to be used on any platform

Control and acquire data from NI-SWITCH devices.

Instrument Control Toolbox™ Support Package for National Instruments® NI-SWITCH Hardware enables you to communicate with NI-SWITCH hardware remotely from a computer running MATLAB®.This support

Generate code optimized for C6000 DSP.

Embedded Coder® Support Package for Texas Instruments™ C6000™ DSPs enables you to generate a real-time executable and download it to your TI development board. Embedded Coder automatically generates

Control and configure NI-DCPwr power supplies and SMUs.

Instrument Control Toolbox™ Support Package for National Instruments NI-DCPower Power Supplies enables you to communicate with NI-DCPower power supplies remotely from a computer running MATLAB®. You

Control and acquire data from NI-DMM digital multimeters.

Instrument Control Toolbox™ Support Package for National Instruments® NI-DMM Digital Multimeters enables you to communicate with NI-DMM digital multimeters remotely from a computer running MATLAB

solstislab

Version 1.0.0.0

by Todd

Matlab driver to communicate with a SolsTiS M Squared CW Ti-saphire laser using TCP/IP.

windows machine's ip address by typing ipconfig into the command prompt. Functions. solstis_findInstrument - initialize solstis instrument object solstis_getWavelength - read wavelength

face recognition

Version 1.2.0.0

by Arjun j s

face recogntion technology.

face recogntion technology.

Guitar Tuner

Version 1.0.0.0

by Ryan

Graphical guitar and musical instrument tuner

Two functions: one for printing and one for reading into a struct an National Instruments XML file

Acquire video and images from National Instruments frame grabbers.

Image Acquisition Toolbox™ Support Package for National Instruments® Frame Grabbers enables you to acquire images from National Instruments frame grabbers directly into MATLAB® and Simulink®.This

Object oriented solution for Shimmer sensor data capture directly into Matlab. Now also with Verisense data sync support via examples.

IntroductionThe Shimmer Matlab Instrument Driver package is a set of Matlab .m files designed to assist users of theShimmer2, Shimmer2r, Shimmer3 and Verisense in the development of Shimmer based

Data Acquisition Toolbox adaptor for VXI Technology devices

is available at:http://www.mathworks.com/products/daq/For additional information on using MATLAB with VXI Technology devices, visit: http://www.mathworks.com/products/instrument/supported/vxi.html This

Design, analyze, and prototype for Texas Instruments C2000 microcontrollers

NOTE: This support package is no longer supported by MathWorks. It is recommended that you use C2000 Microcontroller Blockset which includes the support for latest Texas Instruments™ C2000

Acquire radar data from Texas Instruments millimeter wave sensor evaluation modules

Using the Radar Toolbox Support Package for Texas Instruments® mmWave Radar Sensors, you can connect, configure, and acquire radar data from Texas Instruments millimeter wave (mmWave) Sensor

Explore, model, and simulate 6G enabling technologies with MATLAB®

The 6G Exploration Library for 5G Toolbox™ enables you to explore, model, simulate, andtest candidate 6G waveforms and technologies. It enables you to:Generatewaveforms with parameters extending

Software that allows the analysis of the measurement of mechanical vibrations in rotating machines.

To use the "Virtual Instrument" software, you need to copy the folder "Virtual Instrument for the Analysis of Vibrations in Rotary Machines" in the desired computer location and, then, execute the

Linking Matlab and Aspen Hysys through COM technology ("actxserver")

(given their symbolic definition)

Introducing artificial intelligence to freshmen with an image classification demo using convolutional neural networks

This sample code has been developed in collaboration with Kanazawa Institute of Technology on image classification using Convolutional Neural Networks. Using an original visualization app built with

Complementary files to the book "Braiding technology for textiles"

This submission consists of the files to the book "Braiding technology for textiles" of Elsevier by Yordan KyosevThe files ch15_1.m, ch15_2.m, ch15_3.mand ch15_4.m are demonstrating some basic

Distinguish between signal and noise in audio source

pop). Includes a tutorial on how to use statistics (correlation coefficient) to calculate the signal to noise ratio.Realtime implementation using Texas Instruments TMS320C5510 DSK and TMS320C6713 DSK

Read files generated by the Intan Technologies GUI for recording multichannel data.

Reads Intan Technologies files. It reads the full file and then selects the requested parts, thus reducing the amount of data in workspace.It can read all streams and select a certain range

This file outline the Aspen Plus and Matlab connection through COM Technology.

An application written in C for the Texas Instruments C5000.

Laboratory 5 of 12 for the Texas Instruments TMS320C5416 DSK.A self-teach application or college laboratory to allow the student to find out by practical experiment the answer to the following

Load more