Industrial Engineer from the Pontifical Catholic University of Paraná (2008/2012) and Master in Production and Systems Engineering also from the Pontifical Catholic University of Paraná (2013/2015). PhD in Production and Systems Engineering at Pontifical Catholic University of Paraná (2015/2019). Works in the area of Production Engineering, with emphasis on Operations Research, sub-areas: Modeling, Analysis and Simulation of Productive Systems; Decision-making processes; Time Series Analysis and Forecasting; Intelligent Systems (Artificial Neural Networks); Mathematical Programming and Optimization (Linear, Integer, Mixed and Non-Linear Programming; Global Optimization: Genetic Algorithms, Simulated Annealing, Tabu Search, Direct Search, Multiobjective Optimization, Swarm Optimization, among other techniques); and Data Mining (Big Data).

Question

Surrogate optimization with different size constraints

I have this problem for optimization (22-dimensional): Min sum(t1/x1,t2/x2,...,t22/x22) Subject to: x1 + x2 + ... + x22 -140...

2 months ago | 1 answer | 0

Question

Why is the Neural Network training slow when I don't use the Matlab Toolbox?

I am trying to optimize neural weights using the standalone Levenberg-Marquard algorithm, but the ANN training is much slower th...

4 months ago | 0 answers | 0

Answered

How can I use the trained weights of a neural network

I found the answer (output and yy are equal): % Simulated a Neural Network clear close clc rng default [x,y] = sim...

How can I use the trained weights of a neural network

I found the answer (output and yy are equal): % Simulated a Neural Network clear close clc rng default [x,y] = sim...

7 months ago | 0

| accepted

Answered

How to use weights and bias from Neural Network Toolbox for classification

I found the answer (output and yy are equal): % Simulated a Neural Network clear close clc rng default [x,y] = sim...

How to use weights and bias from Neural Network Toolbox for classification

I found the answer (output and yy are equal): % Simulated a Neural Network clear close clc rng default [x,y] = sim...

7 months ago | 0

| accepted

Question

How can I use the trained weights of a neural network

How can I use the trained weights of a neural network to simulate the output of a classification problem?

7 months ago | 1 answer | 0

Question

Matlab returns which epoch's weights of a Neural Network training?

If I trained my Neural Network until 10 iterations and my best validation epoch is 3, Matlab will return the weights from the 10...

8 months ago | 0 answers | 0

Answered

i want to train neural network with nntool but input and target size donot match error occur

The input and targets must be 4x81 and 1x81. Use the transpose function.

i want to train neural network with nntool but input and target size donot match error occur

The input and targets must be 4x81 and 1x81. Use the transpose function.

8 months ago | 0

Answered

Which epoch is the training result of the train function

For a shallow neural network you can use the code: net.trainParam.max_fail = x where x is the number of fails in increase the ...

Which epoch is the training result of the train function

For a shallow neural network you can use the code: net.trainParam.max_fail = x where x is the number of fails in increase the ...

8 months ago | 0

Question

How to use weights and bias from Neural Network Toolbox for classification

I found a code in Matlab Answers for regression: x = 0:0.1:10; % input dimension 1x101 y = sin(x); % output dimension 1x101 ...

8 months ago | 1 answer | 0

Answered

How Matlab calculate the centroid of a polyshape?

From http://paulbourke.net/geometry/polygonmesh/: Where:

How Matlab calculate the centroid of a polyshape?

From http://paulbourke.net/geometry/polygonmesh/: Where:

12 months ago | 0

| accepted

Question

How Matlab calculate the centroid of a polyshape?

I am using the centroid command to find the centroids of polyshapes, but on the documentation I didn't find how Matlab calculate...

12 months ago | 1 answer | 0

Question

How to detect a dark color in RGB triplet?

I am plotting a map with many subdivision and colors. I would like to automatically draw the borders with contrasting color wit...

12 months ago | 1 answer | 0

Question

How to partition (discretize) the space around points using Voronoi Diagram?

I have a problem: The plot shows a 399 cities locations and the Voroni Diagram (in latitude and longitude coordinates). The qu...

12 months ago | 1 answer | 1

Question

How can I convert a shapefile boundaries to lat and lon?

I have a shapefile of counties subdivisions (Paraná State, Brazil) and I would like to extract an array of bounding lat and lon ...

12 months ago | 0 answers | 0

Answered

How to calculate the Euclidean distance beetwen all points of Latitude Longitude pairs?

function [d1,d2] = pos2dist(point1,point2) % Distance: % d1: distance in km based on Haversine formula % d2: distance in km b...

How to calculate the Euclidean distance beetwen all points of Latitude Longitude pairs?

function [d1,d2] = pos2dist(point1,point2) % Distance: % d1: distance in km based on Haversine formula % d2: distance in km b...

12 months ago | 0

| accepted

Question

How to calculate the Euclidean distance beetwen all points of Latitude Longitude pairs?

I have a 399 cities array with LON LAT coordinates (first column for the Longitudes), like the picture below. How can I calcu...

12 months ago | 1 answer | 0

Question

Better “centerpoint” than centroid of a concave polygon

I'm using the centroid of polygons to attach a marker in a map application. This works definitely fine for convex polygons and ...

12 months ago | 2 answers | 0

Question

How to find a figure's centroid inside a polyshape?

I have the following problem: I am plotting the boundaries of several municipalities and I need to list each one. As there are...

1 year ago | 1 answer | 0

Question

How to plot text in mapshow map

I have this map I made using mapshow function: I used the data in this structure to create the map: My function is (I ne...

1 year ago | 0 answers | 0

Question

Mathematical formulation of a operations research problem

How can I implement this objective function and its constraints in Matlab (p-median problem)? Thank you very much!

1 year ago | 1 answer | 0

Submitted

Quantum-Behaved Particle Swarm Optimization

The Q-PSO function + 11 benchmark functions.

2 years ago | 20 downloads |

Submitted

Gaussian Quantum-Behaved Particle Swarm Optimization

The Gaussian Q-PSO function + 11 benchmark functions + original article.

2 years ago | 10 downloads |

Submitted

CLONALG - Clonal Selection Algorithm for Optimization Problems

Clonal Selection Algorithm for Minimization Problems

3 years ago | 8 downloads |

Question

How to plot the content of a Structure without using a for loop?

I need to plot the content of a *_structure_* fiel: <</matlabcentral/answers/uploaded_files/111837/Capture.PNG>> Each ...

3 years ago | 1 answer | 0

Submitted

Elastic Distortion Transformation on an image

Expanding Data Sets through Elastic Distortions

3 years ago | 3 downloads |

Question

Neural Network - How to use a custom training function

Is it possible to replace standard matlab training methods (like _*Gradient Descent*_, *_Levenberg-Marquardt_*, etc.) by other m...

3 years ago | 2 answers | 0

Answered

How can I plot a confusion matrix for a multi-class or non-binary classification problem?

Implementation code: Confusion Matrix function [] = confusion_matrix(T,Y) M = size(unique(T),2); N = size(T,2)...

How can I plot a confusion matrix for a multi-class or non-binary classification problem?

Implementation code: Confusion Matrix function [] = confusion_matrix(T,Y) M = size(unique(T),2); N = size(T,2)...

3 years ago | 1

Answered

How can I vectorize a function?

Because of the above problems I'm using my own function with *|surfc|* to replace *|fsurf|*: function z = plotfcn(fcn,range...

How can I vectorize a function?

Because of the above problems I'm using my own function with *|surfc|* to replace *|fsurf|*: function z = plotfcn(fcn,range...

3 years ago | 0

Answered

Difference between fsurf and ezsurf

*MathWorks' Support Response:* I have been able to reproduce the slow down that you were experiencing. The *|fsurf|* function...

Difference between fsurf and ezsurf

*MathWorks' Support Response:* I have been able to reproduce the slow down that you were experiencing. The *|fsurf|* function...

3 years ago | 0

| accepted

Question

Difference between fsurf and ezsurf

I have a problem with |*fsurf*| command: When I use fsurf(@(x,y) ackleyfcn([x,y]),[-32 32 -32 32]) I got this warning...

3 years ago | 2 answers | 1