Thingspeak with MKR1000 example program from Arduino library 2.0.0 sends http error -301

7 views (last 30 days)
I am using the standard program WriteSingleField from the Thingspeak library to send a number between 0 and 99 to one of he fields in my channel. Every 20 seconds the field is updated in the Arduino program. But after two updates I get an HTTP error -301 and the channel is stops updating...
I tried several things (changing my write api key, using a longer delay, ) but cannot find a suolution. My Arduino MKR1000 uses the WiFi101 library and this is also the latest version 0.16.1.
I have not changed anything in my WiFi router. Who knows a solution?
  1 Comment
Christopher Stapels
Christopher Stapels on 3 Jun 2021
Which version of the ThingSpeak library do you have?
-301 is a connectivity error. Can you try moving the device?
If the two writes and then fail is really consistent, that would make the newtwork connectivity less likely.
My MKR 1000 does not show this issue though I'm not sure I've tested it with all the most recent updates.

Sign in to comment.

Accepted Answer

Alex Pikkert
Alex Pikkert on 7 Jun 2021
<SOLVED>
The problem was not caused by router settings or distance between the board and the router or a weak USB power plug or delay settings in the program...
It was a firmware issue !
I checked the firmware version of my MKR1000 board using the standard updater procedure in the IDE.
I found my firmware version was 19.4.4 and I could upgrade to 19.6.1. (Board version MR510PB).
Now the WriteSingleField program is working 100% OK !

More Answers (1)

Vinod
Vinod on 4 Jun 2021
The fact that it is stable with PC USB and unstable when powered by standalone USB suggests that perhaps the standalone USB is not supplying the necessary amperage and your device is browning out when performing network communication.
Try changing to a USB power plug that provides at least 2A current @5V. And while you're at it, use the same USB cable as when you're connected to your PC.
  3 Comments
Alex Pikkert
Alex Pikkert on 7 Jun 2021
Hi Vinod,
I did set up a hotspot wifi on my phone and connected my MKR1000. Connection OK, still no connection to my channel, resulting in HTTP error -301......
Checking my network scanner app shows that my board gets an ip address and after a few minutes the address is lost. Both in my hotspot wifi (phone 4G) and my home router..
Faulty MKR1000 maybe?

Sign in to comment.

Communities

More Answers in the  ThingSpeak Community

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!